Need help?Do you have a question about the Beckman Coulter AU680 and is the answer not in the manual?
General| Wavelength Range | 340 to 800 nm |
|---|---|
| Assay Types | Clinical Chemistry, ISE |
| Sample Volume | 2-35 µL |
| System Type | Fully automated chemistry analyzer |
| Sample Types | Serum, plasma, urine, cerebrospinal fluid |
| ISE Capability | Optional |
| Photometric Accuracy | ±0.005 Absorbance |
| Barcode Reading | Yes |
| Power Requirements | 200-240 VAC, 50/60 Hz |
| Throughput | Up to 800 tests per hour |
| Dimensions | Approximately 150 cm (W) x 90 cm (D) x 120 cm (H) |
Details the physical components of the AU680 analyzer and their functions.
Explains the step-by-step process for analyzing samples on the AU680.
Procedure for creating a data index, selecting tests, and entering operator name.
Covers essential daily inspections and replenishment of solutions.
Process for verifying reagent status and adding new reagents.
Procedure for ensuring accurate test results through calibration.
Steps for running quality control to validate system performance.
Covers the procedures for placing and processing samples on the analyzer.
Procedure for handling emergency stops and system recovery.
Understanding and responding to system alarms and their levels.
Guides for resolving issues with reagent blanks, calibrations, and QC.
To Next Page