Need help?Do you have a question about the Beckman Coulter Avanti J-26XP and is the answer not in the manual?
General| Brand | Beckman Coulter |
|---|---|
| Model | Avanti J-26XP |
| Category | Laboratory Equipment |
| Language | English |
Defines symbols and terminology used for hazard communication in the manual.
Crucial safety guidelines for instrument installation, relocation, and servicing.
Precautions to prevent electrical shock and ensure safe power connection.
Warnings regarding flammable materials and their use near the centrifuge.
Guidelines for safe operation, rotor handling, and preventing mechanical hazards.
Precautions for handling hazardous samples, spills, and waste disposal.
Details performance specs like speed, time, temperature, and physical dimensions.
Lists compatible rotors with their codes, max speeds, RCF, capacity, and manual numbers.
Lists prerequisites for installing the centrifuge, including electrical and site needs.
Covers power supply, voltage ratings, wire connections, and circuit breaker specifications.
Guidelines for proper placement, clearances, and ventilation for the centrifuge.
Guidance on using older J2 series rotors with the Avanti J, including drive pin checks.
Details the centrifuge's capabilities and built-in safety mechanisms.
Describes the control panel, buttons, knobs, and display for operating the unit.
In-depth explanation of the digital display, knobs, and touch keys for parameter entry.
Explains the function of START, STOP, CLEAR, and SET/ACTUAL operational keys.
A quick step-by-step guide for typical centrifuge operation.
Instructions for properly installing rotors and loading samples into the centrifuge.
Detailed steps for setting speed, time, and temperature for a run.
Specific procedures for performing elutriation runs with the appropriate rotor.
How to initiate a run, monitor progress, and safely stop the centrifuge.
Steps for safely opening the door and removing the rotor after a run.
Explains diagnostic messages and their meanings for troubleshooting.
A table detailing error messages, problems, results, and recommended solutions.
Procedures to manually access the rotor and sample in case of power loss.
How to resolve misidentification problems with the JCF-Z rotor.
Regular checks and cleaning to ensure optimal centrifuge performance and longevity.
Step-by-step guide for cleaning the chamber, exterior, and drive hub.
Instructions for locating, removing, and installing the centrifuge's air filter.
Guidelines for safely storing or returning the centrifuge and accessories.
A list of common replacement parts and centrifuge supplies with part numbers.
Explains the need for temperature calibration and the procedure's goal.
Step-by-step guide to measure and adjust the centrifuge's temperature settings.
Outlines the warranty coverage period, exceptions, and conditions for repair or replacement.
States limitations on warranties and liabilities for damages or consequential issues.
To Next Page