IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 2
IMPORTANT INSTRUCTIONS
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND PERSONAL INJURY, THIS
PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS
1. Read all instructions before using this device. Use this device only as described in this
manual. Any other use not recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
2. Do not operate device unattended. Turn off or unplug when not in use.
3. Make certain that the power source conforms to the electrical requirements of this device.
4. DO NOT OPERATE MORE THAN ONE BEDJET ON SAME AC-POWER OUTLET WITHOUT
ADJUSTING DUAL MODE SWITCH LOCATED ON REAR OF DEVICE TO “DUAL ZONE ON, LOW
POWER” FOR REDUCED POWER
5. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
6. DO NOT plug device into any other cord connected device, such as a power strip, surge
protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices
may create a fire hazard. Plug unit directly into a wall outlet only.
7. Always plug this device directly into a wall outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet/power strip).
8. Do not operate this device with a damaged cord or plug or after the device malfunctions or
has been dropped or damaged in any manner. Return device to authorized service facility
for examination, electrical or mechanical adjustment or repair.
9. To disconnect device, make sure device is not currently operating in heat or cool mode, turn
Power Switch to OFF, then remove plug from outlet.
To Next Page
Loading...