EasyManua.ls Logo

Beem CM-501E - Fire and Property Damage Risks

Beem CM-501E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 20
Do not move the device during the brewing process.
Make sure that the connecting cable does not represent a tripping hazard. The connecting
cable may not hang down from the surface on which the device is placed in order to prevent
the device from being pulled down.
WARNING – Danger of Fire
Do not use the device in rooms containing easily ignitable dust or poisonous and explosive
fumes.
Do not operate the device in the vicinity of combustible material. Do not place any combus-
tible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
Only connect the device to a plug socket with safety contacts that is properly installed and
matches the technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
Lay the mains cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces (also applies to the hot surfaces of the device!).
The device should only be used if it has been correctly assembled! Before each use, check
whether the lter holder and the permanent lter are inserted correctly, the water tank is
lled correctly and the lids are closed correctly!
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
Never pull or carry the device by the connecting cable. When you pull it out of the socket,
always pull on the mains plug and never the mains cable!
Protect the device from other heat sources, naked ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
Use only original spare parts from the manufacturer in order to guarantee that there is no
interference that may prevent the product from working and to avoid possible damage.
08769_DE-EN-FR-ES-IT_A5_V3.indb 2008769_DE-EN-FR-ES-IT_A5_V3.indb 20 13.01.2020 13:57:1713.01.2020 13:57:17

Table of Contents

Related product manuals