EasyManua.ls Logo

Beem Mr. Tea - Page 23

Beem Mr. Tea
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
EN Mr. Tea
BEEM - Elements of Lifestyle
Electrical connection
For safe and trouble-free operation of
the appliance, the following instruc-
tions on the electrical connection must
be be observed:
Before connecting the appliance,
compare the connection data (volt-
age and frequency) on the rating
plate with those of your mains
power supply. This data must cor-
respond in order to avoid damage
to the appliance. If in doubt, ask
your electrical appliance retailer.
The mains socket must be protect-
ed by at least a 16 A fuse.
Ensure that the mains cable is
undamaged and is not laid over
sharp edges.
The mains cable must not be
pulled tightly, bent or come into
contact with hot surfaces.
Route the mains cable to prevent
risk of tripping.
Always unwind the mains lead
completely before connecting the
appliance to the plug socket.
The electrical safety of the appli-
ance is only assured when it is
connected to a properly installed
protective earth (PE) conductor
system. Connection to a mains
socket without PE conductor is
forbidden. If in doubt, the electri-
cal system must be checked by a
qualied electrician. The manufac-
turer assumes no liability for injury
or damage caused by a missing or
interrupted protective earth con-
ductor.

DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
Follow these instructions to avoid
danger.
WARNING
This indicates a possible hazardous
situation, which could lead to severe
physical injury or death.
Follow these instructions to avoid
danger.
ATTENTION
This indicates a potentially hazardous
situation, which could lead to minor
injuries or material damage.
Follow these instructions to avoid
danger.

Table of Contents

Other manuals for Beem Mr. Tea

Related product manuals