Need help?Do you have a question about the Beetech Dongle400 and is the answer not in the manual?
Identifies and describes the physical parts of the Dongle400 USB LTE Stick.
Provides step-by-step instructions for correctly inserting a SIM card into the device.
Instructions for connecting the device to a computer and starting its operation.
Steps to log into the device's web interface for management and configuration.
Guide for manually setting the Access Point Name when automatic detection fails.
Procedures to reset the device to its default factory configuration.
Technical details on the device's radio frequency output power levels.
Instructions on how to access the device's configuration portal via a web browser.
Explains the information displayed on the device's home screen, including network status.
Configuration options for mobile data, APN, data roaming, and network modes.
Details on configuring network protocols and Dynamic Host Configuration Protocol (DHCP) settings.
Settings for advanced features like Firewall, IP Filtering, Port Forwarding, and DMZ.
Management functions including PIN settings, device information, system logs, and upgrades.
Provides solutions for common problems and answers to frequently asked questions.
Critical safety guidelines for operating the device and avoiding hazards.
Recommendations for device care, accessory use, and storage conditions.
Details FCC/CE compliance, SAR limits, and usage restrictions.
General| Category | Modem |
|---|---|
| Model | Dongle400 |
| Network Type | 4G LTE |
| Download Speed | 150 Mbps |
| Upload Speed | 50 Mbps |
| Interface | USB 2.0 |
| Operating Systems | Windows, macOS |
| Frequency Bands | LTE FDD: B1/B3/B7/B8/B20 |
To Next Page