Beetech Dongle400 - Network and DHCP Settings

Data Roaming: To Enable/Disable Roaming connection
Carrier Name: APN Profile Name
Network Mode: Auto/4G/3G, it is suggested to select “Auto”
Network Operator: Auto/Manual, it is suggested to select “Auto”
Network
DHCP
In this section you can configure the DHCP settings.
Default value:
1. DHCP server is enabled
2. Gateway IP address: 192.168.1.1
3. DHCP IP Range: 192.168.1.100 to 192.168.1.200
4. DHCP lease time: 24 hours(86400 seconds)
Click “Apply” after configuring the new settings.