Beetronics User Manual | Bedienungsanleitung | Manuel d’utilisation
24 EN
Accessories
Accessories
Optional dimmer (DMK7) and (DMK8)
Optional infrared extender (IRC7)
The backlight brightness can be adjusted using the remote control (included), the operating buttons at the back, or with the op-
tional accessory, the Beetronics DMK7 external dimmer cable.
To use the DMK7 or DMK8 external dimmer:
1. Insert the dimmer into the appropriate 3.5mm port on the back of the monitor, labeled as Dimmer.
2. Power on the monitor and access the menu using the included remote control. Choose the ‘Backlight in the Picture’ settings and
navigate to ‘by dimmer’ by cycling to the right.
3. You can now utilize the knob on the external dimmer to increase or decrease the screen’s brightness.
All Beetronics displays equipped with a 3.5mm IR input at the rear are compatible with the Beetronics IRC7 infrared extender
(available as an optional accessory).
To use the IRC7 infrared extender:
1. Insert the extender into the appropriate 3.5mm port on the back of the monitor, labeled as IR.
2. You can now utilize the infrared extender with the remote control.
To Next Page
Loading...
