PWM (Pulse-Width Modulation)
A technique used to control analog devices with a digital signal. For example, the B32
Gimbal Controller uses a PWM signal to control the speed and direction of the motors in
a gimbal.
Wikipedia article: en.wikipedia.org/wiki/Pulse-width_modulation
RC (Radio Control)
A general term for controlling the direction of a gimbal remotely. Usually, when this
manual refers to RC receivers and transmitters, we are referencing the type of RC
equipment commonly used with multi-rotor aircraft and model vehicles.
Roll, pitch, yaw
The three axes of rotation. In a 3-axis gimbal, there is a motor for each axis, making it
possible to rotate in any direction.
Wikipedia article: en.wikipedia.org/wiki/Aircraft_principal_axes
SimpleBGC
A reference design of a gimbal controller, developed by Aleksey Moskalenko (AlexMos)
and licensed to manufactures such as BeeWorks LLC.
SimgleBGC GUI
A multi-platform software application developed by BaseCam Electronics, used to
configure gimbal controllers based on the SimpleBGC design.
USB
A communication standard used to connect a computer with the B32 Gimbal Controller.
Both configuration settings and firmware updates can be sent using USB. A wireless
alternative to USB is Bluetooth.!
To Next Page
Loading...