1. Read these instructions thoroughly before using this item.
2. Keep these instructions for future reference.
3. Read all warnings.
4. Follow all instructions.
5. WARNING: To prevent fire or electric shock, do not expose this
equipment to rain or moisture. Do not store or operate this product
near any liquids.
6. Clean only with a dry cloth.
7. Do not store or operate this product near any heat sources such
as radiators, heat registers, stoves, or other apparatuses (including
amplifiers) that produce heat.
8. Unplug the unit during lightning storms or when unused for long
periods of time.
9. When wiring this unit and all other equipment used in
connection to this unit make sure that all of your equipment is
turned OFF.
10. Before placing, installing, rigging, or suspending any product,
inspect all hardware, suspension, cabinets, transducers, brackets
and associated equipment for damage. Any missing, corroded, or
non-load rated component could significantly reduce the strength
of the installation, placement or array. Any such condition severely
reduces the safety of the installation and should be immediately
corrected. Use only hardware which is rated for rated for the
loading conditions of the installation and any possible short-
term, unexpected overloading. Never exceed the rating of the
hardware or equipment.
11. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
TROUBLESHOOTHING
To Next Page
Loading...