Bego Eltropol 300 - Filling the Polishing Bath; Preparation and Filling Procedure

English ⋅ Eltropol 300
29
85955 BA-en/11
en
Installation
The unit may only be installed on an adequately
stable surface.
The unit may only be used in an enclosed space.
The machine is subject to the provisions of class of
protection I and may only be connected to properly
grounded power sources.
Use the appropriate power cable (EU or USA plug)
included with the unit.
NOTE
The two 3.15 AT fuses secure the entire voltage
range from 90 V to 260 V.