2.1 Appropriate Usage
The instrument may only be used under those conditions
and for those purposes for which it was conceived. For this
reason, in particular the safety references, the technical data
including environmental conditions and the usage in dry en-
vironments must be followed.
When modifying or changing the instrument, the op-
erational safety is no longer ensured.
3.0 Transport and Storage
Please keep the original packaging for later transport, e.g.
for calibration. Any transport damage due to faulty packag-
ing will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to
remove batteries when not using the instrument over
a certain time period. However, should the instrument
be get dirty by leaking battery cells, you are kindly re-
quested to return it to the factory for cleaning and in-
spection.
Instruments must be stored in dry and closed areas. In the
case of an instrument being transported in extreme tem-
peratures, a recovery time of minimum 2 hours is required
prior to instrument operation.
Appropriate Usage
17
English
To Next Page
Loading...
Need help?
General
