F-19587
4
4-15-00
FAIL TENSION DIAGRAM FOR TYPICAL STEEL & ALUMINUM
Thickness of Each Coil End - In Inches (mm)
MILD STEEL 45,000 PSI (32 Kg/mm
2
)YIELD
ALUMINUM 5052 H-32 23,000 PSI (16 Kg/mm
2
) YIELD
Single Row Die - Read as pounds (Kg) per 1½” (38mm) of coil width.
Double Row Die - Multiply by 2 and read as pounds (Kg) per 1½” (38mm) of coil width.
Single Row Die with “W15T” as part of model number - Read as pounds (Kg) per 3” (76.2mm) of coil width.
Shift force is 25% of fail for steel and 60% for aluminum.
To Next Page
Loading...