Behncke Control 1.3 User Manual

Control 1.3 Swimming Pool Control Unit
Operation
39
Figure 12: Chemical fill level
6.4.5.5 Factory Settings
You need to go to the Extras  Factory Settings submenu to reset the control unit to the factory settings.
The control unit is reset if you confirm the query with “Yes”.
6.4.5.6 Service
You need to go to the Extras  Service submenu to call up the service functions. The following functions
can be called up here:
 Reset counter: the operating hours counter is reset if you confirm the query with “Yes”.
 Solar test: the solar test function is called up for 3 minutes if you confirm the query with “Yes”. This
activates the filter pump at maximum speed and the solar pump and collector valve are activated.

Behncke Control 1.3 Specifications

General

Brand	Behncke
Model	Control 1.3
Category	Control Unit
Language	English