Disassembly and Disposal
45
Disassembly and Disposal
When it reaches the end of its service life, the control unit must be disassembled and disposed of in an
environmentally friendly manner.
Disassembly
Before the disassembly work starts:
Disconnect the control unit from the power supply (caution: voltage may still be present after you
have disconnected it due to the capacitors). Consult a specialist for the disassembly.
Then disassemble the assemblies and components in accordance with the applicable local
environmental regulations.
Disposal
Send the disassembled components for recycling after they have been correctly dismantled:
Remove and recycle packaging
Scrap any leftover metal
The control unit must be treated as waste electrical and electronic equipment for recycling purposes.
To Next Page
Loading...