WARNING!
Risk of injury due to improperly carried out maintenance work!
Improper maintenance can lead to serious injuries or property damage.
Before starting, ensure that there is sufficient room to carry out the installation work.
Make sure that the installation location is tidy and clean! Loose components and tools
lying around or on top of each other are sources of accidents.
If components have been removed, make sure that they are installed properly.
Reinstall all fixing elements and observe the screw tightening torques.
All work must only be carried out by specialists/qualified electricians.
Environmental protection
Replaced parts must be disposed of in accordance with the local regulations.
Maintenance / Repairs
Proper maintenance is essential for the trouble-free operation of the control unit.
To Next Page
Loading...
Need help?
General