Control 1.3 Swimming Pool Control Unit
Please set the date in the “General” menu.
Calibration process failed (I > 8 A)
The motor current is greater than 8 A. The power
must not be supplied via the control unit.
“X” outside of the limit values
The value for the parameter “X” (pH, chlorine,
redox) is outside of the set limit values. The limit
values cannot be changed. Please check the
water values and the measurement & control
system.
Communication with hang-in electrode
extender
There is a communication error with the level
control. Please arrange for a specialist to check
the connections.
Communication with display extender
There is a communication error with the level
control display. Please arrange for a specialist to
check the connections.
To Next Page
Loading...