Need help?Do you have a question about the Behringer A500 and is the answer not in the manual?
General| Amplifier class | A/B |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 300 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (4 Ohm) | 185 W |
| RMS power output per channel (8 Ohm) | 125 W |
| Bridge-mode power output per channel (8 Ohm) | 375 W |
| XLR in | Yes |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | Binding post |
| Purpose | Performance/stage |
| Cooling type | Passive |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| LED indicators | Power, Status |
Weight and Dimensions| Depth | 101.6 mm |
|---|---|
| Width | 257.5 mm |
| Height | 482.6 mm |
| Weight | 8800 g |
Explains symbols for electric shock, voltage, and servicing warnings.
Detailed RMS and peak power output for stereo and bridged modes.
Covers input sensitivity, distortion, frequency response, gain, damping factor, and impedance.
Details on input/output connectors, circuit protection, and power supply voltage/fuses.
Physical dimensions, weight, front/rear controls, and indicator LEDs.
Details FCC rules, potential interference, and user corrections.
To Next Page
