Behringer C210 - C210 Getting started

1. POWER button turns the unit on and off.
2. MODE button switches the DSP between USB, SD, and Bluetooth.
3. U/SD button switches between USB and SD/MMC for playback of audio files.
4. REPEAT button activates the repeat playback mode. Press to choose between One, Random, Folder or All
repeat modes.
5. BACK/FORWARD/VOLUME ring controls DSP volume and back/forward between songs.
6. PLAY/PAUSE button starts and stops playback of audio files.
7. DSP button switches between digital equalizer presets for Pop, Rock, Jazz, Classic, Country or Music.
8. MUTE button mutes the sound.
9. NUMERIC KEYPAD allows you to enter values for various functions.
NOTE: The master POWER switch is located on the back of the unit and must be switched on or off manually. The
remote control does not control the master POWER switch.
CAUTION: Do not expose the remote control’s batteries to excessive heat, such as sunshine, fire, or similar heat
sources.
C210 Getting started
Step 3: Getting started
1. Place the speaker in your desired location.
2. Set all controls as shown: TREBLE and BASS knobs to their centered position at 12 o’clock; LEVEL 1, LEVEL 2,
LINE/INST LEVEL and MASTER set to their minimum levels at the full counter-clockwise position.