Why can't music sequencer playback be started on my Behringer Concert CDP2000-BK Musical Instrument?
Playback can only be started when the memory of the music sequencer contains data. It's possible that no data has been recorded. Also, check if any tracks have been activated for recording.
Why was the music recorded with the music sequencer lost on my Behringer Musical Instrument?
When you re-record a track, this will automatically erase the previously recorded data on this track.
Why can't I select music sequencer/DEMO mode on my Behringer Concert CDP2000-BK Musical Instrument?
DEMO mode must not be active when you switch to music sequencer mode. Conversely, the music sequencer must be off before you can switch to DEMO mode.
Why does my Behringer Concert CDP2000-BK sound strange?
If your Behringer Musical Instrument sounds strange, check if any of the LEDs above the EFFECT button are lit, indicating that a modulation effect is active. If so, press the button until all LEDs are off, meaning no effect is active. Also, make sure you haven't selected two sounds at the same time. Press one of the sound buttons in the SOUND SELECT section to select a single sound.
Why is the effect not audible on my Behringer Concert CDP2000-BK Musical Instrument?
If the effect is not audible on your Behringer Musical Instrument, ensure that an effect has been selected and that its intensity is not too low. Check that the REVERB and EFFECT LEDs are lit and select an appropriate effect intensity.
How to fix Behringer Concert CDP2000-BK Musical Instrument when key velocity does not work?
If the key velocity on your Behringer Musical Instrument isn't working properly, check if any of the LEDs above the VELOCITY button are lit. If needed, activate the dynamic response by pressing the VELOCITY button. Also, be aware that some sounds do not respond to key velocity.
What to do if my Behringer Concert CDP2000-BK Musical Instrument audio signal is distorted?
If the audio signal from your Behringer Musical Instrument is distorted, first, reduce the volume using the MAIN VOLUME control. Then, check if the LED above the TRANSPOSE switch is lit. If it is, the transposition is active; press the button to switch it off.
General| Type | Digital Piano |
|---|---|
| Number of Keys | 88 |
| Key Action | Hammer Action |
| Touch Sensitivity | Yes |
| Effects | Reverb, Chorus |
| Demo Songs | Yes |
| Metronome | Yes |
| Transpose | Yes |
| Tuning | Yes |
| Display | LCD |
| Headphone Outputs | 2 |
| Power Supply | AC Adapter |
| Color | Black |
| Tones | Piano, Electric Piano, Strings, Organ |
| Pedals | 3 (Sustain, Sostenuto, Soft) |
| Connectivity | USB, MIDI |
Covers reading instructions, heed warnings, general handling, accessories, and servicing.
Guidelines for safe operation regarding water, heat, ventilation, and electrical connections.
Covers unpacking, initial operation checks, and online product registration.
Instructions for powering the digital piano on/off and adjusting the main volume.
Description of main volume, speaker switch, brightness control, and demo button.
Details on sequencer, metronome, tempo, edit mode, and display controls.
Details on LINE OUT, LINE IN, MIDI connectors, and power supply connection.
Information on the three foot pedals and headphone jacks.
Step-by-step guide to enter EDIT mode for advanced functions.
Step-by-step guide for recording music pieces using the built-in sequencer.
How to edit recorded tracks and play back recorded music.
Setting key velocity to control sound volume based on playing force.
How to save custom settings and restore factory defaults.
Solutions for problems with instrument power, sound output, and pedal functionality.
Troubleshooting issues with effects, mode selection, and sequencer operation.
Resolving problems related to tuning, key velocity, MIDI communication, and display errors.
To Next Page
