Behringer DIGITAL MIXER X32 COMPACT User Manual

Page 3 of 6
Input Channel Strip Output Channel Strip
Select button allows
changing parameters
and viewing on
maindisplay
Channel Level meter
with Compressor/
Gate LEDs
Mute button
Solo button
Channel fader
Channel LCD display
DAW Remote button
activates MIDI control of
software parameters
Mute button
Select button allows
changing parameters on a
viewing on main display
DCA Groups 1-8
layer select
Group/Bus Level meter
with Compressor and
Pre-fader status LEDs
Bus 1-8 layer
selectbutton
Buses/Groups
Sends-on-Faders
buttonallows bus faders
to control selected
channelsend levels
Output fader
Solo button
Bus 9-16 layer
select button
Channel LCD display
Matrix 1-6, Main
C select button
Rear Panel Input Patchbay
IEC Power socket
and switch
Option card
and slot
USB
connector
Ethernet
connector
MIDI I/O AES/EBU
Output
ULTRANET
output
AES50 A/B
Bi-Directional
Ports
Lamp
connector
External
Talkback
Mic input
Monitor/Control
Room Outputs
Auxiliary Input
connectors
(¼" and RCA)
Auxiliary Output
connectors
(¼" and RCA)
Assignable Output
connectors (XLR)
Channel Input
connectors (XLR)

Behringer DIGITAL MIXER X32 COMPACT Specifications

Input Characteristics

total number of input sources	150 / 160 @ 48 kHz sample rate
input impedance XLR	5 kΩ / 10 kΩ unbal. / bal.
equivalent input noise	-128 dBu

Output Characteristics

output level XLR	+4 dBu / +21 dBu
output impedance XLR	75 Ω
phones output impedance / level	40 Ω / +25 dBm (stereo)

Power

phantom power	48 V switchable per input
power consumption	120 W
power supply	100-240 V (50/60 Hz)