4
EUROPOWER PMH2000
SPECIFICATIONS
Mono inputs
Microphone inputs
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -122 dB / 125 dB A-weighted
@ 50 Ω source resistance -122 dB / 125 dB A-weighted
@ 150 Ω source resistance -121 dB / 124 dB A-weighted
Frequency response <10 Hz - 100 kHz (-1 dB),
<10 Hz - >200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ +8 dB gain
Impedance approx. 2.2 kΩ balanced /
1.1 kΩ unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu In @ +33 dB gain)
Distortion (THD+N) 0.001% / 0.0008% A-weighted
Mono line inputs
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩ balanced,
40 kΩ unbalanced
Max. input level 30 dBu
Stereo line inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 40 kΩ unbalanced
Max. input level +28 dBu
EQ
Low 60 Hz / ±15 dB
Mid 700 Hz / ±15 dB
High 6 kHz / ±15 dB
Preamp outputs left/mono & right
Type 1/4" TRS connector, unbalanced
Impedance approx. 1.5 kΩ
Max. output level +21 dBu
Power amp inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 47 kΩ
Max. input level +21 dBu
Monitor output
Type 1/4" TRS connector, unbalanced
Impedance 1.5 kΩ
Max. output level +21 dBu
DSP 24-bit Texas Instruments
TM
Converter 24-bit Sigma-Delta,
64/128-times oversampling
Sampling rate 46.875 kHz
Main mix system data
1
Noise
Main mix @ -oo,
Channel fader -oo -76 dB / -80 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -72 dB / -76 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB -71 dB / -75 dB A-weighted
Power amp specifications
Power amp output (Sine @ 1 % THD)
Stereo mode 250 Watts into 4 Ω
180 Watts into 8 Ω
Bridge mode 500 Watts into 8 Ω
Loudspeaker connections
Loudspeaker connector Professional speaker
connectors (compatible to
NEUTRIK
®
SPEAKON
®
)
Load impedance
Left/monitor 4/8/16 Ω
Right/mono main 4/8/16 Ω
Bridge 8/16 Ω
Power supply
Voltage USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Power consumption max. 1 kW
Fuse 100 - 120 V~: T 12 A H 250 V
200 - 240 V~: T 5 A H 250 V
Mains connection Standard IEC receptacle
Physical/weight
Dimensions (H x W x D) approx. 11" (280 mm) x 18 1/8"
(460 mm) x 10 5/8" (270 mm)
Weight (net) approx. 30.9 lbs (14 kg)
Measuring conditions:
1: 20 Hz - 20kHz; measured at preamp output.
All channels: level controls in center position; EQ flat.
Reference = 0 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
To Next Page
Loading...
