EURORACK UB502/UB802/UB1002/UB1202
Installation8
Audio connections3.2
You will need a large number of cables for different applications.
The illustrations below show how the connectors should be wired.
Be sure to use only high-grade cables.
Please use commercial RCA cables to connect the 2-track inputs
and outputs.
You can, of course, also connect unbalanced devices to the bal-
anced inputs/outputs. To do this, use either mono plugs or stereo
plugs with the ring and sleeve bridged (pins 1 and 3 in the case
of XLR connectors).
Caution! Never use unbalanced XLR connectors (PIN +
1 and 3 connected) on the MIC input connectors when
using the phantom power supply.
XLR connectionsFig. 3.1:
1/4" mono plugFig. 3.2:
1/4" stereo plugFig. 3.3:
Stereo plug for headphones connectionFig. 3.4:
To Next Page
