Behringer EURORACK UB1002 - Specifications

EURORACK UB502/UB802/UB1002/UB1202
Specications 9
Specications4.
Mono inputs
Microphone inputs (IMP “Invisible” Mic Preamp)
Type XLR connector, electronically balanced,
discrete input circuit
Mic E.I.N.
1
(20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response
<10 Hz - 150 kHz -1 dB
<10 Hz - 200 kHz -3 dB
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In @
+22 dB GAIN)
Distortion (THD+N) 0.005 % / 0.004 % A-weighted
Line input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ balanced, approx. 10 kΩ
unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB GAIN
Fade-out attenuation
2
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader muted 89 dB
Frequency response (Mic In → Main Out)
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo inputs
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
Equalizer
EQ mono channels
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
EQ stereo channels
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
Send / Return
Aux sends
Type ¼" TS jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Stereo aux returns
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ balanced / approx. 10 kΩ
unbalanced
Max. input level +22 dBu
Outputs
Main outputs
Type ¼" TRS jack, unbalanced
Impedance approx. 120 Ω unbalanced
Max. output level +22 dBu
Control room outputs
Type ¼" TS jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones output
Type ¼" TRS jack, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main mix system data
3
(Noise)
Main mix @ -∞, channel fader @ -∞
-106 dB / -109 dB A-weighted
Main mix @ 0 dB, channel fader @ -∞
-95 dB / -98 dB A-weighted
Main mix @ 0 dB, channel fader @ 0 dB
-84 dB / -87 dB A-weighted
Power supply
Power consumption UB502: 13 W
UB802: 17 W
UB1002: 18 W
UB1202: 23 W
Mains voltage
USA/Canada 120 V~, 60 Hz,
MXUL5 adapter
U.K./Australia 240 V~, 50 Hz,
MXUK5 adapter
Europe 230 V~, 50 Hz,
MXEU5 adapter
Japan 100 V~, 60 Hz,
MXJP5 adapter
Physical/weight
UB502
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
5 1/4" (134 mm) x 7" (177 mm)
Weight (net) approx. 0.55 kg (1.21 lbs)
UB802
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
7 2/5" (189 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.00 kg (2.21 lbs)
UB1002
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
7 2/5" (189 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.05 kg (2.31 lbs)
UB1202
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
9 1/2" (242 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.35 kg (2.97 lbs)
1
Equivalent Input Noise
2
Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output;
unity gain.
3
20 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ at; all chan-
nels on main mix; channels 1/3 as far left as possible; channels 2/4 as far right as
possible; reference = +6 dBu.
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modications may be made from time to time to existing
products without prior notice. Specications and appearance may differ from those
listed or illustrated.