Behringer iNuke NU3000 Features

Page 10 of 11
NU12000
Output Power
Maximum output power
Stereo
2 Ω per channel, stereo 2 x 6000 W
4 Ω per channel, stereo 2 x 3400 W
8 Ω per channel, stereo 2 x 1700 W
System
Controls
Front "Power switch
Gain controls (channels A
and B)"
Rear "Mode switch (stereo / mono)
Crossover switch
(LF / fullrange / HF)
Circuit breaker"
Indicators
Power Amber backlit illuminated
gain controls
Limit (per channel) 0 dB, full scale
Signal (per channel) -24, -12, -6 dB
Input sensitivity
V RMS @ 8 Ω 0.75 V (-0.3 dBu)
Connectors
Inputs 2 x combo jacks
Input impedance 10 kΩ unbalanced,
20 kΩ balanced
Outputs 2 x locking-style professional
speaker connectors
Output circuit type Class-D
Distortion <0.2 %
Frequency response 20 Hz to 20 kHz, +0 / -2 dB
Damping factor >100 @ 8 Ω
Signal-to-noise >100 dB
Circuit protection
Cooling "Continuously variable speed
fan
Back-to-front air ow"
Amplier protection "Thermal and DC protection
Stable into reactive or
mismatched loads"
Load protection On/o muting, DC-fault
power supply shutdown
Power Supply, Voltage (Breaker)
USA / Canada / Japan 100-120 V~, 50/60 Hz,
(50 A 250 VAC)
UK / Australia / Europe / 220-240 V~, 50/60 Hz,
Korea / China (25 A 250 VAC)
Power consumption @ 2 Ω, 1300 W
1/8 rated power
Power consumption @ 4 Ω, 760 W
1/8 rated power
Mains connector Neutrik powerCON 32 A
Dimensions/Weight
Dimensions (H x W x D) appr. 94 x 482 x 436 mm
appr. (3.7 x 19 x 17.2")
Weight appr. 12 kg (26.5 lbs)
NU6000
Output Power
Maximum Output Power
Stereo
8 Ω per channel, stereo 1500 W
4 Ω per channel, stereo 3000 W
2 Ω per channel, stereo —
Bridged mono
8 Ω —
4 Ω —
System
Controls
Front Power switch
Gain controls (channels A and B)
Rear Mode switch (stereo/mono)
Crossover switch
(fullrange/100 Hz)
Indicators
Power Amber/red backlit illuminated
gain controls
Limit (per channel) 0 dB, full scale
Signal (per channel) -24, -12, -6 dB
Connectors
Inputs 2 x combo jacks
Input impedance 10 kΩ unbalanced,
20 kΩ balanced
Outputs 2 x locking-style professional
speaker connectors
Output circuit type Class D
Distortion <0.2%
Frequency response 20 Hz to 20 kHz, +0 / -2 dB
Damping factor >140 @ 8 Ω
Signal-to-noise >100 dB
Circuit Protection
Cooling Continuously variable speed fan
Back-to-front air ow
Amplier protection Thermal and DC protection
Stable into reactive or
mismatched loads
Load protection On/o muting, DC-fault power
supply shutdown
Power Supply, Voltage (Breaker/Fuse)
USA / Canada 120V~, 60Hz (25A)
UK / Australia / Europe 220-240 V~, 50/60 Hz, (12A)
Korea / China 220-240 V~, 50/60 Hz,(12A)
Japan 100 V~, 50/60 Hz, (25A)
Power consumption @ 2 Ω —
Power consumption @ 4 Ω 620 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) appr. 89 x 483 x 328 mm
appr. (3.5 x 19 x 12.91")
Weight 5 kg (11 lbs)
iNUKE NU12000DSP/
NU6000DSP/
NU3000DSP/
NU1000DSP/
NU12000/
NU6000/
NU3000/
NU1000

Behringer iNuke NU3000 Specifications

General

Brand	Behringer
Model	iNuke NU3000
Category	Amplifier
Language	English