Need help?Do you have a question about the Behringer iNuke NU6000 and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Number of Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| THD | < 0.5% |
| Connectors (Input) | XLR, 1/4" TRS |
| Connectors (Output) | Binding posts, Speakon |
| Power Output (4 Ohms) | 3000 Watts |
| Power Output (8 Ohms) | 1500W |
| Cooling | Fan cooled |
| Power Output (2 Ohms) | 6000 Watts |
General warnings to reduce fire or electric shock risks.
Step-by-step instructions for connecting the amplifier to audio sources.
Details front panel controls like gain, signal/limit LEDs, and rack mounting.
Adjusts input levels for channels A and B via dedicated controls.
Selector for amplifier mode (mono/stereo/bridge) and crossover function.
Step-by-step guide covering powering off, setting controls, and powering on.
Instructions for setting up the amplifier in bi-amping mode.
To Next Page
