Need help?Do you have a question about the Behringer iNuke NU1000DSP and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Power Output | 1000 W |
| Power Output @ 4Ω | 1000 W |
| DSP | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | > 100 dB |
| Crossover | Yes |
| THD | < 0.1% |
| Input Sensitivity | 0.775 V |
| Damping Factor | > 200 |
| Input Connectors | XLR, TRS |
| Output Connectors | Speakon |
| Cooling | Fan-cooled |
| Input Impedance | 20 kΩ |
| Protection | Thermal, short circuit, overload |
| Power Supply | 100-240 V AC, 50/60 Hz |
Covers warranty validity, exclusions, transferability, and claims.
Procedures for registering purchases and returning products for service.
Illustrates the initial connection process for the amplifier setup.
Illustrates the initial connection process for the amplifier setup.
Illustrates the initial connection process for the amplifier setup.
Illustrates the initial connection process for the amplifier setup.
Illustrates the initial connection process for the amplifier setup.
Setup example for connecting a V-AMP Pro guitar rig.
Setup for recording a full band to a computer.
Explains the amplifier's controls and their functions.
Explains the amplifier's controls and their functions.
Explains the amplifier's controls and their functions.
Explains the amplifier's controls and their functions.
Explains the amplifier's controls and their functions.
Details the various input/output jacks and connectors on the rear panel.
Explains the breaker function and automatic fan speed adjustment.
Guides through initial setup procedures for the amplifier.
Guides through initial setup procedures for the amplifier.
Guides through initial setup procedures for the amplifier.
Guides through initial setup procedures for the amplifier.
Guides through initial setup procedures for the amplifier.
Details DSP functions like Delay, Limit, and saving/loading presets.
Explains how to split signals for bi-amplification.
Explains how to split signals for bi-amplification.
Explains how to split signals for bi-amplification.
Explains how to split signals for bi-amplification.
Explains how to split signals for bi-amplification.
Details specific channel settings for bi-amping operation.
Details technical specifications of the amplifier models.
Details technical specifications of the amplifier models.
Details technical specifications of the amplifier models.
Details technical specifications of the amplifier models.
Details technical specifications of the amplifier models.
Provides general user guidance and important notes.
Provides general user guidance and important notes.
Provides general user guidance and important notes.
Provides general user guidance and important notes.
Provides general user guidance and important notes.
To Next Page
