Need help?Do you have a question about the Behringer iNuke NU1000 and is the answer not in the manual?
General| Damping factor | 155 |
|---|---|
| Amplifier class | D |
| Frequency range | 20 - 20000 Hz |
| Built-in crossover | Yes |
| Crossover frequency | 100 Hz |
| Audio output channels | - channels |
| Peak power per channel | 1050 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.1 % |
| RMS power output per channel (2 Ohm) | 530 W |
| RMS power output per channel (4 Ohm) | 310 W |
| RMS power output per channel (8 Ohm) | 160 W |
| Bridge-mode power output per channel (8 Ohm) | 620 W |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | - |
| Fuse rating | 250 V |
| Cooling type | Active |
| Product color | Multicolor |
| Volume control | Rotary |
| Connectivity technology | Wired |
| AC input voltage | 220-240, 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| LED indicators | Power, Signal strength |
Weight and Dimensions| Depth | 248 mm |
|---|---|
| Width | 483 mm |
| Height | 89 mm |
| Weight | 2800 g |
Essential safety guidelines covering electrical hazards, handling, and environmental exposure.
Covers legal disclaimers, warranty terms, conditions, and claim procedures.
Illustrates the connection setup for DJ equipment.
Diagrams for guitar rigs and full band recording connections.
Explanation of front panel controls and indicators.
Details on rear panel inputs, outputs, power source, and connectors.
Explanation of the mode and crossover selector switch functions.
Step-by-step instructions for powering on and configuring the amplifier.
Guidance on setting input and output levels for optimal signal strength.
Instructions for setting up horizontal bi-amping using iNUKE amplifiers.
Detailed wiring instructions for horizontal bi-amping configurations.
Instructions for setting up vertical bi-amping using an external crossover.
Detailed specifications for output power and system controls across models.
Details on input/output connectors, circuit type, distortion, and cooling systems.
Specifications for power supply voltage, current consumption, dimensions, and weight.
Guidance on registering products online and seeking support or reporting malfunctions.
Information regarding FCC rules and compliance for the device.
To Next Page
