EasyManua.ls Logo

Behringer KM750 User Manual

Behringer KM750
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start Guide
KM1700/KM750
Professional 1700/750-Watt Stereo Power Amplier with
ATR (Accelerated Transient Response)
V 3.0
A54-00002-90912
Question and Answer IconNeed help?

Do you have a question about the Behringer KM750 and is the answer not in the manual?

Behringer KM750 Specifications

General IconGeneral
Power Output750W
Channels2
Signal to Noise Ratio> 100 dB
TypeStereo Power Amplifier
Power Rating (4 Ohms)2 x 400W
Power Rating (8 Ohms Bridged)1 x 750W
Output ConnectorsBinding posts, Speakon
Frequency Response20 Hz to 20 kHz
CoolingContinuously variable speed fan
Power Rating (8 Ohms)2 x 200 Watts
Input ConnectorsXLR, 1/4" TRS
ProtectionThermal, short circuit, DC protection

Summary

Important Safety Instructions

Legal Disclaimer

Limited Warranty

KM1700/KM750 Hook-up

KM1700/KM750 Controls

Twist-Locking Speaker Outputs

Connects amplifier to speakers using twist-locking plugs.

Binding Post Outputs

Accept bare wire connections from speaker cables.

Ground Lift Switch

Eliminates humming caused by ground loops.

Limiter Switch

Activates the internal limiter.

Mode Switch

Selects between MONO, STEREO, and BRIDGE modes.

Sensitivity Switch

Adjusts input sensitivity versus amplifier's rated output power.

Inputs

Accept line-level input signals.

RCA Inputs

Accept unbalanced line-level signals using RCA connectors.

Breaker

Automated fuse for eliminating cause of faulty operation.

KM1700/KM750 Getting started

KM1700/KM750 Bi-amping

Professional Speaker Connector

Connector compatible with Neutrik speakON connectors.

Specifications

Other important information

Federal Communications Commission Compliance Information

Related product manuals