Need help?Do you have a question about the Behringer KM1700 and is the answer not in the manual?
General| Gain | 35.6 dB |
|---|---|
| Damping factor | 120 |
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | - channels |
| Peak power per channel | 1700 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| XLR in | Yes |
| Speakers connectivity type | 1/4\ |
| AC input voltage | 120 V |
| Power source type | AC |
| AC input frequency | 60 Hz |
| Power protection features | Short circuit |
| Power consumption (typical) | 500 W |
| Purpose | Performance/stage |
| Product color | Black |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 375 mm |
|---|---|
| Width | 482 mm |
| Height | 88 mm |
| Weight | 12500 g |
Covers warnings indicated by symbols for electrical hazards and proper handling.
Provides a numbered list of essential safety precautions for operating the equipment.
Introduces the bi-amping process and its benefits for speaker efficiency.
Details connecting amplifiers and crossovers for horizontal bi-amping audio signals.
Explains cable routing for horizontal bi-amping, connecting amps to distribution panels.
Guides on setting the subwoofer mode and connecting amplifier signals for bi-amping.
To Next Page