Behringer MonoPoly - VCO 1, 2, 3, 4; VCF; VCF EG; VCA EG

page 6 of 6
985-40000-01200 Rev.A
2022-04-21
Condential, for internal use only. Not to be reproduced.
page 6 of 6
Condential, for internal use only. Not to be reproduced.
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of
Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2022 All rights reserved.
Synthesizers and Samplers
MONOPOLY
End of Procedure
Complete calibration
Short press HOLD + EFFECTS will conrm and save all calibration result. If successful, all BUTTON LEDs will blink at the
same time for a while. Otherwise, it may be a failed calibration.
NOTE: Press HOLD + MONO CHORD will cancel all calibration and return back to normal mode.
Calibrate MG1 WHEEL minimum position
Move the MG1 WHEEL to its minimum position.