Need help?Do you have a question about the Behringer NEUTRON and is the answer not in the manual?
General| Product type | Analog synthesizer |
|---|---|
| Product color | Red |
| Sound effects | Overdrive |
| Volume control | Rotary |
| Built-in speaker(s) | No |
| Keyboard number of keys | 0 |
| Maximum polyphony (notes) | 1 |
| Power source type | DC |
| MIDI in | Yes |
| 6.35 mm (1⁄4-inch) output | 2 |
General safety precautions for operating the Neutron synthesizer safely and preventing hazards.
Guidelines for proper disposal of batteries and environmental considerations.
Legal information regarding liability, trademarks, and copyright.
Details on warranty terms, conditions, and where to find more information.
Highlights the paraphonic design, dual VCOs, patch bay, LFO, ADSRs, delay, and overdrive circuit.
Instructions for initial setup, checking packaging, and understanding the product manual.
Guidance on powering up audio systems safely, including monitor connections.
Covers classic sound revival, paraphonic mode, and oscillator/LFO morphing.
Details the multi-mode filter, analog delay, and overdrive circuit for sound shaping.
Covers semi-modular design, poly chain readiness, Eurorack compatibility, and controls.
Details the main controls located on the top panel of the synthesizer.
Explains controls for VCOs, VCF, LFO, and noise/VCA bias.
Details controls for delay, overdrive, and the two ADSR envelope generators.
Explains output section, Sample & Hold, and Slew Rate Limiter controls.
Details attenuator functions and the extensive patch bay inputs/outputs.
Details rear panel inputs, outputs, power switch, and MIDI channel selection.
Explains audio/MIDI connections and the Neutron's USB Class Compliant nature.
Guides hardware setup, oscillator shapes, and VCF modes and controls.
Explains LFO, delay capabilities, and overdrive circuit functions.
Explains the two ADSR envelopes, their routing, and triggering.
Details Sample & Hold, Slew Limiter, and Attenuator functions.
Explains pitch bend handling and configuring the assignable output.
Details envelope retriggering and blending oscillator/LFO shapes.
Covers oscillator tuning, LFO MIDI sync, and connecting multiple Neutrons.
Step-by-step instructions for removing the Neutron from its chassis and installing it in a Eurorack case.
Guides on downloading and installing firmware updates for the Neutron.
Step-by-step guide to calibrate the ASSIGN output voltage using MIDI-OX.
Procedure to calibrate the delay feedback and repeats using internal trim pots.
Procedure to minimize clock noise in the delay output after calibration.
Explains default routings and provides creative patching ideas and examples.
Illustrates a typical studio setup for the Neutron synthesizer.
Demonstrates example patches for sound creation.
Guides on resolving common problems like no sound, no MIDI, or erratic behavior.
Addresses audio buzzing/humming and provides a summary of technical specifications.
Defines useful symbols, terms, and abbreviations used in the manual.
States compliance with FCC rules for digital devices and potential interference.
To Next Page