page 5 of 6
985-40000-01200 Rev.A
2022-04-21
Condential, for internal use only. Not to be reproduced.
page 5 of 6
Synthesizers and Samplers
MONOPOLY
Start MG1 WHEEL Calibration
Press button POLY POLY, then VCO3 LED will illuminate.
Calibrate MG1 WHEEL maximum position
Move the MG1 WHEEL to its maximum position.
Calibrate BEND WHEEL dead zone
Move the BEND WHEEL within the dead zone where you don't feel the tension of the spring.
To Next Page
Loading...
