Check our website regularly for any updates to SynthTool.exe or MONOPOLY documentation.
Typical SynthTool screens
Note: for OUTPUT Parameters, the options are MIDI (DIN), MIDI (USB), or BOTH.
Parameters can also be accessed via MIDI system Exclusive (SysEx) commands. Please see the information shown
below.
MONOPOLY System Exclusive Data Sheet
The “Synthtool.exe” application allows you to select the MIDI channel number and to set and adjust various
parameters of the MONOPOLY to suit your preferences. Parameters can also be accessed via MIDI system
Exclusive (SysEx) commands. Please see the information shown below.
SETTING VALUES VIA SYSEX
Use the following data format to set global value using a SysEx message.
F0 00 20 32 00 01 0c aa bb cc D0 … Dn F7
00 20 32 = Manufacture SYSEX ID number (Behringer GmbH)
00 01 12 = MODEL ID for MONOPOLY
aa = Device ID: 00-0x7F (must match hardware device ID), or 0x00 to address all devices.
bb = Packet Number
cc = Sub packet number (maybe absent for some message).
D0..Dn = Packet payload
COMMAND TABLE
To Next Page
Loading...
