Page 3 of 3
©2009 BEHRINGER International GmbH. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks (except BEHRINGER, the BEHRINGER logo and JUST LISTEN) mentioned belong to
their respective owners and are not affiliated with BEHRINGER. FOR INTERNAL USE BY BEHRINGER DEALERS ONLY. DO NOT DISTRIBUTE. 985-10000-00382
Order via the BEHRINGER 24/7 Dealer Portal or contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: +61 3 9877 7170, fax: +61 3 9877 7870 BEHRINGER Germany tel.: +49
2154 9206 4149, fax: +49 2154 9206 4199 BEHRINGER Japan tel.: +81 3 5281 1180, fax: +81 3 5281
1181 BEHRINGER Singapore tel: +65 5845 1800, fax: +65 6214 0275 BEHRINGER USA / CANADA
tel: +1 425 672 0816, fax: +1 425 673 7647
behringer.com
SPECIFICATIONS
Connectors ¼" TS, unbalanced
Power supply 9 V, 1.7 A switching adaptor(included)
USA/Canada 120 V~, 60 Hz GPE182-090170-1 (HSB-UL)
Europe/Australia 230 V~, 50 Hz GPE182-090170-2 (HSB-EU)
U.K. GPE182-090170-3 (HSB-UK)
Korea 220 V~, 60 Hz GPE182-090170-4 (HSB-SAA)
China 220 V~, 50 Hz GPE182-090170-5 (HSB-CCC)
Japan 100 V~, 50/60 Hz GPE182-090170-6 (HSB-JP)
Power connector 2 mm DC jack, center negative
(with daisy-chain cable included)
Power consumption 2 mA
Dimensions (H x W x D)
PB1000 504.3 mm (19 ⁄") x 663.6 mm (26 ⁄") x
115 mm (4 ½")
PB600 329 mm (13") x 663.6 mm (26 ⁄") x
115 mm (4 ½")
Weight
PB1000 approx. 5.33 kg (11.8 lbs) including PSU
& daisy chain
PB600 approx. 3.8 kg (8.4 lbs.) including PSU &
daisy chain
BEHRINGER is constantly striving to maintain the highest professional stan-
dards. As a result of these efforts, modifications may be made from time to
time to existing products without prior notice. Specifications and appearance
may differ from those listed or illustrated.
PB600
Universal Effects
Pedal Board
DC OUT connector
powers all effects
via daisy chain.
1.7 A power
adaptor connector. DC cabling duct.
Heavy-duty
plastic casing.
Sliding locks hold lid firmly in place when
pedal board is not in use.
¼" TS INPUT
connector receives
signal from
instrument.
¼" TS TO EFFECTS
connector sends
signal to effects
pedals.
Foam padding
holds effect pedals
in place.
FROM EFFECTS connectors receive stereo
signal from pedals. OUTPUT TO AMP
connectors send signal to two amps.
To Previous Page
Loading...
