Behringer Preamp Booster PB100

To Next Page

PREAMP BOOSTER PB100

Thank you for showing your confidence in us by purchasing the BEHRINGER PREAMP

BOOSTER PB100. This high-quality effects pedal can be used to boost the volume and

shape the sound of any instrument. Thanks to its high-performance features you will be

able to match Piezo pickups to regular amp inputs or boost volume while playing solo parts.

1. CONTROLS

PB100 top view

The BASS control allows you to adjust the low-frequency range of the signal.

The TREBLE control allows you to adjust the high-frequency range of the signal.

The GAIN control adjusts the amount of preamplification.

The ON/BATT LED illuminates when the effect is activated. It also serves as a

battery level indicator.

Use the footswitch to activate/deactivate the effect.

Use this 1/4" TS IN connector to plug in the instrument cable.

The 1/4" TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or

replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be

careful not to scratch the unit.

+ The PB100 has no on/off switch. As soon as you insert the jack into the IN

connector, the PB100 begins running. When not using the PB100, remove

the jack from the IN connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

Need help?

Do you have a question about the Behringer Preamp Booster PB100 and is the answer not in the manual?

Summary

CONTROLS

BASS, TREBLE, and GAIN Controls

Adjusts low-frequency, high-frequency, and preamplification levels.

Effect Activation and Battery Indicator

Footswitch controls effect, ON/BATT LED shows status.

Input and Output Connections

1/4" TS connectors for instrument and amplifier signals.

Power Options and Battery Management

Details on DC IN connection, battery compartment, and automatic power activation.

WARRANTY

SPECIFICATIONS

Input;Output Connector and Impedance

Details on 1/4" TS connectors and signal impedance.

Power Supply and Connector Specs

Voltage, current, connector type, and adapter information.

Physical Dimensions and Weight

Measurements and mass of the PB100 unit.

SAFETY INSTRUCTIONS

General Safety Precautions

Advice on avoiding water, heat, and unauthorized repairs; use qualified personnel.