Behringer PB600 - Page 3

Page 3 of 3
©2010 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability
for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00382
behringer.com
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149, Fax: +49 2154 9206 4199
USA/Canada Tel.: 1 425 672 0816, Fax: +1 425 673 7647
Singapore Tel.: +65 5845 1800, Fax: +65 6214 0275
Australia Tel.: +61 3 9877 7170, Fax: +61 3 9877 7870
Japan Tel.: +81 3 5281 1180, Fax: +81 3 5281 1181
DC OUT
connector
powers all e ects
via daisy chain
1.7 A power
adaptor
connector
DC cabling
duct
Heavy-duty
plastic
casing
Sliding locks
hold lid  rmly
in place when
pedal board is
not in use
¼" TS INPUT connector
receives signal from
instrument.
¼" TS TO EFFECTS
connector sends signal
to e ects pedals
Foam padding
holds e ect
pedals in place
FROM EFFECTS
connectors receive
stereo signal from
pedals. OUTPUT TO AMP
connectors send signal
to two amps
SPECIFICATIONS
Power Supply 9 V, 1.7 A switching adaptor(included)
Connectors ¼" TS, unbalanced
USA/Canada 120 V~, 60 Hz
GPE182-090170-1 (HSB-UL)
Europe/Australia 230 V~, 50 Hz
GPE182-090170-2 (HSB-EU)
U.K. GPE182-090170-3 (HSB-UK)
Korea 220 V~, 60 Hz
GPE182-090170-4 (HSB-SAA)
China 220 V~, 50 Hz
GPE182-090170-5 (HSB-CCC)
Japan 100 V~, 50/60 Hz
GPE182-090170-6 (HSB-JP)
Power connector 2 mm DC jack, center negative
(with daisy-chain cable included)
Power consumption 2 mA
PHYSICAL
PB1000
Dimensions 504.3 x 663.6 x 115 mm
(H x Wx D ) 19 / x 26 ⁄ x 4 ½"
PB600
Dimensions 13 x 26 ⁄ x 4 ½"
(HxWxD) 329 x 663.6 x 115 mm
PB1000
Weight approx. 11.8 lbs / 5.3 kg
including PSU & daisy chain
PB600 approx. 8.4 lbs / 3.8 kg
including PSU & daisy chain
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these e orts,
modi cations may be made from time to time to existing products without prior notice. Speci cations and
appearance may di er from those listed or illustrated.
PEDAL BOARD
PB600