Behringer SHARK FBQ100 - Page 10

10 SHARK FBQ100 User Manual
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Unbalanced ¼" TS connector
Tip
(signal)
output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
1
2
3
Balanced use with XLR connectors
Fig. 3.2: Dierent plug types
Please ensure that only qualified persons install and operate the ◊
SHARK. During installation and operation the user must have sufficient
electrical contact to earth. Electrostatic charges might affect the
operation of the SHARK!
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)