EasyManua.ls Logo

Behringer Ultra-dyne Pro DSP9024 - Technical specifications

Behringer Ultra-dyne Pro DSP9024
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
Status Bytes
Program Changes
Pcxx c = Channel
xx = Program (0..99)
Controller
Controller Offset adjustable from 0 to 64*
Ccxx c = Channel
xx = Number
Data Bytes
Display Controller Value
0 = Left Channel
1 = Right Channel
2 = Stereolink On
c= 0..5 Selected Band
c= 80 Bandlink On
GTH 0..127**
CTH 0..127**
CRA 0..127**
CAT 0..127**
CRT 0..127**
ULT 0..127**
OUT 0..127**
LTH 0..127**
EXC 0..127**
ODE 0..127**
PRC 0..127**
12AX7 0..31
12AY7 32..63
EL34 64..95
EL84 96..127
Tube TypeTYP
Output Gain
Limiter Threshold
Exciter Process
Band Mode
Compressor Ratio
Compressor Attack Time
Compressor Release Time
Ultramizer Process
Odd / Even
Tube Process
0
3
4
5
6
7
Gate Threshold
Compressor Threshold
Controller
Number
Parameter / Function
1
2
Channel Mode
12
8
9
10
11
13
Tab. 6.2: The controller functions via MIDI
* It is possible to set an offset for the MIDI controller. Begin then starting at that number.
** The controller value ranges are adapted to the real value ranges.
6.6 Technical specifications
ANALOG AUDIO INPUTS
Connections XLR and 6.3 mm TRS jacks
Type RF-suppressed, servo-balanced input
Impedance 50 kOhm balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced
CMR typ. 40 dB, >55 dB @ 1 kHz
ANALOG AUDIO OUTPUTS
Connections XLR and 6.3 mm TRS jacks
Type Electronically controlled, servo-balanced output amplifier
Impedance 60 Ohm balanced, 30 Ohm unbalanced
Max. Output Level +16 dBu balanced and unbalanced
BYPASS
Type Relaycontrolled Hard-Bypass
6. APPENDIX

Table of Contents

Other manuals for Behringer Ultra-dyne Pro DSP9024

Related product manuals