15
ULTRA-VOICE VX2000
8. SPECIFICATIONS
As a standard, the BEHRINGER ULTRA-VOICE VX2000 is equipped with electronically servo-balanced inputs
and outputsexcept for the insert connectors. The circuit design features automatic hum and noise reduction
for balanced signals and thus allows for trouble-free operation, even at the highest operating levels. Externally
induced mains hum, etc. will be effectively suppressed. The automatic servo-function recognizes the presence
of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input
and output signals (6-dB correction).
+ Please ensure that only qualified persons install and operate the VX2000. During installation
and operation the user must have sufficient electrical contact to earth. Electrostatic charges
might affect the operation of the unit.
8. SPECIFICATIONS
FREQUENCY RESPONSE
Line In to Main Out 10 Hz to 200 kHz; +0 / -1.6 dB
(bypass mode)
DISTORTION
MIC -> Ins Send < 0.02 % / -30 dBu in / 30 dB Gain
Line -> Ins Send < 0.002 % / 0 dBu in / Unity
NOISE (absolute) A-weighted
Main Out bal. -98 dBu
Recording Out -100.5 dBu
INPUT LEVEL (max.)
Mic In +11.5 dBu
Line In +22 dBu
OUTPUT LEVEL (max.)
Main Out bal. +22 dBu
Main Out unbal. +22 dBu
Recording Out +22 dBu
Insert Send +22 dBu
POWER SUPPLY
Mains voltage U.S./Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power consumption 20 W max.
Fuse 100 - 120 V ~: T 630 mA H
200 - 240 V ~: T 315 mA H
Mains connector Standard IEC receptacle
PHYSICAL (H x W x D) 1 ¾" (44.5 mm) x 19" (482.6 mm) x 8 ½" (217 mm)
WEIGHT approx. 3 kg
SHIPPING WEIGHT approx. 4.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
illustrated.
To Next Page
Loading...
Need help?
General
