Behringer VINTAGE DELAY VD400

To Next Page

VINTAGE DELAY VD400

Vintage Analog Delay Eects Pedal

Thank you for showing your condence in us by purchasing the

Behringer VINTAGE DELAY VD400. This ultimate eects pedal is designed

to deliver amazing delay sounds comparable to state-of-the-art studio

processors. Thanks to its parameter controls, you’ll have plenty of cool

sounds at your disposal to handle almost any situation.

The delay eect creates a delay of the input signal with various

repetitions. Dierent tempo settings allow interesting delay eects.

1. Controls

(1) The REPEAT RATE control adjusts the delay time (repetition rate).

(2) The ECHO control adjusts the eect output level.

(3) INTENSITY control adjusts the number of repetitions.

(4) The ON/BATT LED illuminates when the eect is activated.

It also serves as a battery level indicator.

(5) Use the footswitch to activate/deactivate the eect.

(6) Use this ¼" TS IN connector to plug in the instrument cable.

(7) The ¼" TS OUT connector sends the signal to your amp.

(8) The ¼" TS DIR OUT connector sends the unaected signal

to connect, for example, to a separate amp.

◊ ◊ If you use the OUT connector only, it will send the aected

signal and, when deactivated, the unaected signal. When

using both the OUT and the DIR OUT, the VD400 acts like an

A/B box. This means when activated, the OUT sends only the

echo signal while the DIR OUT carries the dry signal. When

deactivated the OUT is muted while the DIR OUT sends the

unaected signal.

Use the DC IN connection to plug in a 9 V power supply (not included).

V 1.0

(4)

(1)

(7)

(8)

(6)

(3)

(5)

(2)

Other manuals for Behringer VINTAGE DELAY VD400

User Guide2 pages

Manual2 pages

Need help?

Do you have a question about the Behringer VINTAGE DELAY VD400 and is the answer not in the manual?

Summary

Controls and Connectivity

Parameter Controls

Adjusts delay time (Repeat Rate), effect output level (Echo), and repetition count (Intensity).

Status Indicators and Activation

Covers the ON/BATT LED for status/battery and the footswitch for effect activation/deactivation.

Input;Output Jacks

Details the IN, OUT, and DIR OUT 1/4" TS connectors and their functions, including dual output operation.

Safety and Operation

Battery Compartment and Power Management

Location of battery compartment, replacement, and tips for battery life extension.

General Safety Guidelines

Essential precautions for safe operation, installation, and maintenance.

Technical Specifications

Connectivity and Impedance

Details the 1/4" TS connectors and their respective impedance values for input and output.

Power Supply and Physical Dimensions

Lists power supply, battery type, consumption, dimensions, and weight of the pedal.