Behringer DIGITAL REVERB/DELAY DR400 - User Manual

DIGITAL REVERB/DELAY DR400
Digital Stereo Reverb/Delay Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL REVERB/
DELAY DR400. This Reverb/Delay eects pedal delivers 24-bit high-resolution stereo reverb and
delay eects. Experience state-of-the-art sounds comparable to studio processors in one compact pedal.
1. Controls
(4)
(1)
(3)
(8)
(6)
(7)
(5) (2)
(1) Select the eect mode via the MODE
switch (see table below).
(2) Depending on the selected mode,
this knob adjusts the reverb time or
the delay time.
(3) Use the ¼" TS IN connector to plug in
the instrument cable.
(4) The BALANCE control determines
the balance between the direct
(dry instrument) signal and the
eect sound.
(5) In REVERB mode, this knob adjusts
the reverbs’ tonal character. In delay
and DLY+rev mode, this knob
adjusts the amount of feedback
(number of repetitions).
(6) The two ¼" TS connectors OUT A and OUT B send the signal to your amp or other eects devices.
Use both connectors if you want to achieve a full stereo eect. For mono use, just plug in OUT A.
(7) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(8) Use the foot switch to activate/deactivate the eect. When pressing the foot switch
2 seconds or longer, you can tap in the delay time (ON/BATT LED ashes).
(9) Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
1 Eect description 2 3 8
DELAY
1 Short delay (32 - 128 ms) Delay time Feedback
Tap delay time
2 Medium delay (128 - 500 ms) Delay time Feedback
3 Long delay (500 - 2000 ms) Delay time Feedback
DLY + REV
4 Delay+small room (32 - 2000 ms) Delay time Feedback
5 Delay+big room (32 - 2000 ms) Delay time Feedback
6 Delay+concert hall (32 - 2000 ms) Delay time Feedback
7 Delay+reverb plate (32 - 2000 ms) Delay time Feedback
REVERB
8 Simulates the reverb of a small room Reverb time Tone
—
9 Simulates the reverb of a big room Reverb time Tone
10 Simulates the reverb of a concert hall Reverb time Tone
11 Simulates the sound of a reverb plate Reverb time Tone

Behringer DIGITAL REVERB/DELAY DR400 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
power consumption	65 mA

Ports & Interfaces

input connector type	1/4" TS
input impedance	500 kΩ
output connector type	1/4" TS

Weight and Dimensions

dimensions	54 x 70 x 123 mm
weight	0.33 kg

Summary

Controls Overview

Mode Selection and Time Adjustment

Select effect mode via MODE switch; adjust time based on selected mode.

Instrument Input Connection

Use the 1/4" TS IN connector to plug in the instrument cable.

Balance and Tone;Feedback Controls

Balance dry/effect signals; adjust tone (reverb) or feedback (delay/repetitions).

Stereo and Mono Output Options

OUT A/OUT B connectors send signal to amp/effects for stereo or mono use.

Effect Activation and Tap Tempo

Foot switch activates/deactivates effect; long press for tap tempo.

Safety Instructions

Handling and Servicing Precautions

Avoid water/heat, use authorized accessories; contact qualified personnel for repairs.

Product Specifications

Input and Output Specifications

Details on In/Out connectors and their respective impedances.

Power and Battery Information

Specifications for power supply, battery type, and consumption.

Physical Dimensions and Weight

Provides the physical dimensions and weight of the DR400 pedal.