Behringer XR18 XAIR - Application: External MIDI Controller

XR18 as „Access-Point“
BCF2000 MIDI Controller
USB
DIN IN
DIN OUT
X Air App – MIDI Config settings (Setup -> Mixer)
iPad
Application examples (hook-up diagrams see below)
1) External MIDI device remote-controls XR18 (front-panel DIN ports)
2) Record mixer MIDI automation data on computer (USB interface)
3) Record mixer automation on computer with external MIDI device (DIN port + USB)
4) Send MIDI remote data on XR18-mixer for automation (USB interface)
5) Send MIDI remote data on XR18-mixer for automation + MIDI device connected (DIN
port + USB interface)
1) Connection of external MIDI remote-controller via DIN sockets
 Hardware MIDI controller BCF2000 connected to XR18 via DIN MIDI cables
 Both ways (In/Out) connected to display parametric feedback on BCF2000
 MIDI CC for Fader, Mute, Pan (see MIDI implementation chart last page)
 iPad wirelessly connected to XR18 affects mixer -> all mixer-changes made in the App
are reflected on BCF2000 (and vice-versa)
 Laptop USB connection below purely for audio MTK recording