English
1-2 Beijer Electronics AB, MA00557F
During use
– Keep the terminal clean.
– Emergency stop and other safety functions may not be controlled from the terminal.
– Do not touch the keys, displays, etc. with sharp objects.
– Be aware that the terminal is operable and registers button presses and input via the touch
screen even when background lighting is not on.
Service and maintenance
– The agreed warranty applies.
– Clean the display and face with a soft cloth and mild detergent.
– Only qualified personnel should carry out repairs.
Dismantling and scrapping
– The terminal or parts thereof shall be recycled according to local regulations.
– The following components contain substances that might be hazardous to health and the
environment: lithium battery, electrolytic capacitor and display.
Please read the entire installation manual prior to installing and using this equipment. Only qualified
personnel may install, operate or repair this equipment. Beijer Electronics AB is not responsible for
modified, altered or renovated quipment. Because the equipment has a wide range of applications, users
must acquire the appropriate knowledge to use the equipment properly in their specific applications.
Only parts and accessories manufactured according to specifications set by Beijer Electronics AB may be
used.
BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDI-
RECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE THE REPAIR, REPLA-
CEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER ELECTRONICS AB.
To Next Page
Loading...
Need help?
General
