Need help?Do you have a question about the Beijer Electronics QTERM-G72 and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Resolution | 800 x 480 pixels |
| Touch Technology | Resistive |
| Processor | ARM Cortex-A8 |
| Connectivity | Ethernet, USB |
| Power Supply | 24 VDC |
| Enclosure | Plastic |
| IP Rating | IP65 |
| Operating System | Linux |
| Serial Ports | 2 x RS-232 |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20°C to 70°C |
| Display Size | 7-inch |
Details on serial, Ethernet, PS/2, and other interfaces supported by the QTERM-G70.
Instructions for installing the QTERM-G70 terminal into NEMA-4 rated panels or drywall.
Information on serial, Ethernet, PS/2, and other interfaces for the QTERM-G75 terminal.
Instructions for installing the QTERM-G75 terminal into NEMA-4 rated panels.
Details on handheld and panel-mount connector interfaces for the QTERM-G55 terminal.
Instructions for installing the QTERM-G55 terminal into NEMA-4 rated panels.
Information on connector interfaces, integral cables, and serial ports for the QTERM-G56.
Details on connector interfaces and power/USB device interfaces for the QTERM-G58.
Information on serial ports and their configuration via dip switches for the QTERM-Z60.
Instructions for installing the QTERM-Z60 terminal into NEMA-4 rated panels.
Overview of the various functions available within the Power On Setup utility.
To Next Page
