Power On Setup Power On Setup Functions
Qlarity-Based Terminal Hardware 115
Press [Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup.
8.4.8.6 AutoPower
When AutoPower is enabled, the terminal will enter a low power sleep mode when the Power
key on the keypad is pressed. If asleep, pressing the Power key awakens the terminal and
resumes program execution. Set AutoPower to
Off to disable this behavior. When AutoPower
is disabled, pressing the Power key will generate normal key messages, and the Power LED
may be manipulated using the SetLED API.
Press
[Next] to move to AutoPower, then press [Select] to move to the options. Press [Next]
or
[Back] to select On or Off. Press [Select] to return to the function name.
Press
[Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup.
8.4.8.7 Keypad Backlight
This section will only appear if your terminal includes a keypad backlight. Use this function to
set the default state of the keypad backlight (at power on). Select
On to turn the keypad back-
light on when the power is applied to the unit, or select
Off to turn the keypad backlight off
when the power is applied.
Press
[Next] to move to BACKLIGHT in the KEYPAD section, then press [Select] to move to
the options. Press
[Next] or [Back] to select On or Off. Press [Select] to return to the function
name.
Press
[Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup.
8.4.9 Keyboard
You will only see this category if you have a keyboard connected to the terminal. The Key-
board functions are used to set the key repeat delay time and rate.
8.4.9.1 Rpt Delay
Use this function to select the delay time that you want between when a key is pressed and
when it begins to repeat automatically.
Press
[Next] to move to Rpt Delay, and press [Select] to move to the options. Press [Next] or
[Back] to select the key repeat delay time. The choices are: 250, 500, 750, or 1000 millisec-
onds. Press
[Select] to return to the function name.
To Next Page
Loading...
Need help?
General
