Beijer Electronics X2 control - X2 Series Soft Control with CODESYS; Installation of CODESYS Runtime X2 Control;X2 Marine SC;BoX2 Pro SC (v2.1.1 Build 906); Installation of CODESYS Runtime X2 Extreme SC;BoX2 Extreme SC (v2.0 Build 368)

X2 control – Basic Start Up settings SUEN284 2017-04
www.beijerelectronics.se 6 (19)
Normal.dotm
, 070221
8 Setup in the Programming tools
 iX Developer for the HMI application
 CODESYS for the Control application
X2 control
CODESYS
control-
application
iX
HMI-
application
-EtherCAT
-Modbus TCP/RTU
Ethernet