The BEITONG ASURA 2 Game Controller (Model BTP-2585NS) is a multi-mode gaming peripheral designed for a versatile gaming experience across various platforms. This user manual provides comprehensive instructions for its operation, connection, and maintenance.
Function Description:
The BEITONG ASURA 2 is a wireless game controller that supports multiple connection modes, including Bluetooth and wired USB, making it compatible with a wide range of devices. It features a standard gamepad layout with two analog sticks, a D-Pad, ABXY action buttons, shoulder buttons (LB, RB), triggers (LT, RT), and dedicated SELECT, START, TURBO, and HOME buttons. The controller also incorporates motion sensing capabilities, particularly useful for Nintendo Switch gaming.
Key functions include:
- Power ON/OFF: The controller can be powered on by pressing the BEITONG LOGO Button. To power off, users must press and hold the SELECT button + B button for approximately 3 seconds. The controller also features automatic shutdown functions: after 10 minutes of inactivity when connected, after 120 seconds of inactivity when not connected, or when the battery power is low (below 30%).
- TURBO Function: This allows users to set any action button (A, B, X, Y, LB, RB, LT, RT) to a rapid-fire mode. Pressing and holding the TURBO button in the power-on state, then pressing an action button, activates the TURBO function for that button. Repeating the action cancels it.
- Motion Sensing Adjustment: Specifically for Nintendo Switch connections, the controller's motion sensing sensitivity can be adjusted. Pressing TURBO + D-Pad LEFT reduces sensitivity, while TURBO + D-Pad RIGHT enhances it.
- Vibration Intensity Adjustment: The controller's vibration feedback can be customized. Pressing TURBO + D-Pad UP enhances vibration intensity, and TURBO + D-Pad DOWN weakens it.
- Joystick Calibration: To address issues like joystick drift or unresponsiveness, a calibration function is available. This involves pressing SELECT + START + Right Joystick (RS) to enter calibration mode, rotating both joysticks clockwise 2-3 turns, and then pressing SELECT + START + Right Joystick (RS) again to exit.
- Screenshot/Screen Recording (NS Mode): In Nintendo Switch mode, a short press of TURBO + RS takes a screenshot, while a long press initiates screen recording.
- Toggle A/B Button Value: The controller's working mode and corresponding key values can be switched by pressing the LOGO button + B. This affects how A and B buttons are interpreted across different platforms (NS mode, Wired PC Mode, BFM Mode).
- Firmware Upgrade and Key Test: The BEITONG Gamepad Assistant software allows for firmware upgrades and key testing to ensure optimal performance and access to new features.
Important Technical Specifications:
- Model: BTP-2585NS
- Power Supply: 600mAh Rechargeable Lithium Ion Battery
- Connection: Bluetooth, USB Cable
- Dimensions: 165mm (length) x 105mm (width) x 62.5mm (height)
- Weight: Approximately 216g
- Adaptation Platform: PC (Windows 7 and later), Android Devices, iOS Devices (iOS 13.0 and later), Nintendo Switch
- Package Includes: Gamepad x 1, USB Cable x 1, User Manual x 1
- Indicator Lights: Four indicator lights provide status information for connection mode, charging, and battery level.
- NS Mode: Indicator light 1 is on when connected.
- Wired PC Mode: Indicator light 2 is on when connected.
- Bluetooth xinput Mode (PC/iOS): Indicator light 2 is on when connected.
- Bluetooth BFM Mode (Android): Indicator light 3 is on when connected.
- Charging: All four indicator lights flash slowly when charging in power-off state; the corresponding indicator light flashes slowly when charging in power-on state. All lights remain on for 10 seconds after full charge, then turn off.
- Low Battery: Mode indicator light flashes quickly, and vibration is turned off when battery power is less than 30%.
Usage Features:
The BEITONG ASURA 2 is designed for ease of use and broad compatibility:
- Nintendo Switch Connection:
- Turn on the Switch Console and navigate to "change grip/order."
- Press the LOGO Button to turn on the controller, then press and hold LB + RB until the pairing interface appears on Switch. Press the A button to pair.
- Once paired, the controller will automatically connect upon power-on.
- To clear pairing information, press RB + SELECT + RS + LOGO Button in the power-off state.
- PC Connection (Wired): Connect the controller to the PC using a USB cable, then press the LOGO Button. The controller will vibrate, and indicator light 2 will turn on, signifying a successful connection.
- PC Connection (Bluetooth Wireless):
- Press and hold the LOGO Button + RB for 5 seconds in the power-off state (indicator light 2 will flash).
- On the PC, open Bluetooth settings, search for "Xbox Wireless Controller," and connect.
- The controller will vibrate, and indicator light 2 will turn on upon successful connection. (Requires Bluetooth functionality on PC or a Bluetooth adapter).
- Android Device Connection (BFM Mode):
- Press and hold the LOGO Button + B in the power-off state to enter BFM mode (indicator light 3 will flash).
- On the Android device, open Bluetooth settings, search for "BEITONG 2585NS BFM," and connect.
- The controller will vibrate, and indicator light 3 will turn on upon successful connection. (Supports native games that use gamepads).
- iOS Device Connection (xinput Mode):
- Press and hold the LOGO Button + RB for 5 seconds in the power-off state (indicator light 2 will flash).
- On the iOS device, open Bluetooth settings, search for "Xbox Wireless Controller," and connect.
- The controller will vibrate, and indicator light 2 will turn on upon successful connection. (Supports iOS 13.0 and later, and native games that use gamepads).
Maintenance Features:
- Firmware Updates: Users are encouraged to regularly check for and install firmware updates via the BEITONG Gamepad Assistant software to ensure access to new functions and optimal performance. The software can be downloaded from the official BEITONG website.
- Troubleshooting Connection Issues:
- General Connection: Ensure sufficient battery power. Try connecting via data cable to confirm controller status.
- Bluetooth Issues: Confirm controller firmware is up-to-date. Clear Bluetooth pairing information (RB+SELECT+RS+LOGO), then re-pair. Ensure the terminal device's Bluetooth is on and that no other Bluetooth devices are interfering. Delete old pairing information from the terminal device's Bluetooth settings and restart Bluetooth.
- Disconnection Issues: Avoid environments with many Bluetooth devices, connecting to multiple Bluetooth devices simultaneously, or physical obstructions (especially metal) between the controller and the terminal device.
- Low Battery Indication: The mode indicator light flashes quickly, and vibration is turned off when the battery is low, prompting the user to charge the device.
- Automatic Shutdown: The controller automatically shuts down under specific conditions (inactivity, low power) to conserve battery life.
The BEITONG ASURA 2 Game Controller aims to provide a reliable and adaptable gaming experience across various platforms with its multi-mode functionality, customizable features, and user-friendly maintenance guidelines.
Need help?
General
To Next Page
