Beka Hospitec AVERO Motion - Electromagnetic Compatibility (EMC)

Appendix
Operating manual AVERO Motion V2.6 E Page 41 of 48
13.8 Electromagnetic Compatibility
Electrical medical equipment is subject to special precautionary measures with regard
to EMC and must be installed and operated in accordance with the EMC instructions
included in the accompanying documents.
For the devices and systems from BEKA Hospitec GmbH, no special measures must
be observed.
Portable and mobile HF-communications equipment can interfere with electrical
medical equipment.
Guidance and manufacturer’s declaration - electromagnetic immunity (Table 201)
The AVERO Motion been designed for use in the hereafter listed ELECTROMAGNETIC
ENVIRONMENTS. The customer or the user of the AVERO Motion must ensure that the
appliance is used in such environment.
Emission measurements
Compliance
Electromagnetic environment -
guidelines
High-frequency (HF)
emissions to
CISPR 11
Group 1
The AVERO Motion uses HF radiation
exclusively for internal functions.
Therefore, the HF radiation of the
device is very low and any interference
with adjacent electrical equipment is
unlikely.
High-frequency (HF)
emissions to
CISPR 11
Class B
AVERO Motion is intended for use in
any type of facility including living
quarters and those that are directly
connected to a public mains network
that supplies residential buildings and
buildings used for domestic purposes.
Harmonics to
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker to
IEC 61000-3-3
Compliant