How to fix the height adjustment on Beka Hospitec AVERO Premium Plus Bathtubs?
If the height adjustment of your Beka Hospitec lifting bath tub is not working, check if the mains voltage is present. Also, check if the keypad or the connecting cable is damaged.
What to do if autofill is not working on Beka Hospitec Medical Equipment?
If the autofill is not working, try performing a restart of the equipment. If the issue persists, contact customer service.
How to fix if no water is running in Beka Hospitec Medical Equipment?
If no water is running, check the stop valves for both cold and hot water. Also, inspect the filters in the water inlet for any blockages.
Why is the color light therapy system not working on my Beka Hospitec Bathtub?
If the colour light therapy system is not working on your Beka Hospitec Bathtub, it may be due to a main board defect or projector defect. Inform the after-sales service.
Why aren't the mains LED and temperature indicators lighting up on my Beka Hospitec Bathtub?
If the mains LED and temperature indications do not light up on your Beka Hospitec Bathtub, check if the mains voltage is present.
What to do if automatic filling is not working on Beka Hospitec Bathtubs?
If the automatic filling is not working on your Beka Hospitec Bathtub, separate the bath tub from the mains and restart it. If no result is obtained, contact the service/after- sales service.
Why the color light therapy does not work on Beka Hospitec Medical Equipment?
The color light therapy may not work due to a defective mainboard or headlamp. Contact customer service for assistance.
Why does the drive switch off when lifting with my Beka Hospitec Bathtub?
If the drive switches off during the lifting procedure of your Beka Hospitec Bathtub, it might be because the maximum patient weight has been exceeded. Also, check if the mains voltage is present, the keypad is damaged, or the connecting cable is damaged.
What to do when the mains voltage fails on Beka Hospitec AVERO Premium Plus Bathtubs?
If the mains voltage fails for your Beka Hospitec Bathtub, check your mains fuse and inspect the cables for any damage.
Why is the height adjustment of the lifting tub not working on Beka Hospitec Medical Equipment?
If the height adjustment of the lifting tub is not working: 1. Check if the power is connected. 2. Check the connections between the controller and operating unit. 3. Inspect the control panel for any damage. 4. Check the cables for damage.
Manufacturer's responsibility and warranty conditions for safe operation and maintenance.
Explains the information presented on the device's type label for identification.
Details required tools and the process for safely removing packaging materials.
Instructions for detaching the tub from its pallet and preparing for on-site installation.
Essential checks before operation and guidelines for electrical system connection.
Step-by-step procedures for securing the tub during floor or wall installation.
Guide to setting the thermostat mixer for safe water temperature and scald protection.
Instructions for performing thermal rinsing and adjusting the outlet water temperature.
Defines the intended use, maximum duration, and typical scenarios for the lifting tub.
Critical warnings about patient conditions that preclude the use of the lifting tub.
Comprehensive safety instructions and warnings for operating the lifting tub.
Emphasizes user responsibility for device condition and the importance of technical safety checks.
Identifies key operating elements, including the control panel and tub interior features.
Detailed explanation of the functions and layout of the 10-button control panel.
Instructions for filling the tub and adjusting the tub's height for patient transfer.
Describes how to activate and use the disinfection cycle for hygiene.
Explains the digital displays for temperatures and operational status.
Details operation of the handheld showerhead and pre-set fill level functions.
Instructions for using the air spa system for therapeutic massage.
Guides on activating color light therapy and understanding the power/function LED display.
Instructions for operating the integrated music and sound system via remote control.
Information on the emergency drain function during power failure and battery status.
Steps for filling and operating the optional aroma-therapy system.
Guidance on cleaning the tub body and control panel safely and effectively.
Detailed steps for disinfecting the tub between uses to prevent cross-contamination.
Notes on sterilization suitability and how to contact for technical information.
Instructions for the proper disposal of packaging and the product at end of life.
Outlines required daily, weekly, monthly, and annual tests and inspections for safety.
Provides remedies for common operational errors and system failures.
Information on contacting customer service for unresolved issues.
Comprehensive data on measurements, weight, electrical, and environmental parameters.
Detailed dimensional drawings for the AVERO Premium Plus 190 and 170 models.
Diagrams and details for sanitary and electrical connections during installation.
Official statement confirming compliance with relevant medical device directives.
List of available optional extras, accessories, and spare parts for the lifting tub.
Guidelines and declarations regarding EMC immunity and emissions for medical equipment.
Template for performing device inventory and recording user training records.
General| Brand | Beka Hospitec |
|---|---|
| Model | AVERO Premium Plus |
| Category | Bathtubs |
| Language | English |
To Next Page
